A Construction Worker’s Personal Review of Cofra Thermic Industrial Rubber Boots
If you’re asking yourself the question are Cofra Thermic industrial rubber boots worth the money, then you’ve come to the right place.
I’ve personally owned a pair of Cofra boots for the last 5 years and I have to admit that I’ve changed my mind on these boots from my first review. I feel that my personal review below of these boots will help answer any questions you might have.
Cofra Thermic Industrial Rubber Boots: Are they worth it?
My first reaction to these boots was that you can tellright away that these are a high-end rubber boot. My second thought was thatthey looked really heavy. However, that thought quickly goes away when youactually pick one up and you realize how light weight they really are comparedto other brands in this category. And if you’ve ever worked with heavy bootsall day you know that being light weight will be so much better on your wellbeing at the end of the day. I mean they look rugged and heavy with that thicktread pattern on the bottoms but without the steel safety toe or shank thisreally cuts the weight down significantly.
They are 100% metal free. I liked how this made a massivedifference with weight and also keeping the boot warmer for longer periods oftime. I’ve put these boots through the ringer for what they can handle, andthey passed the test time and time again for light weight and warmth. I have tosay you definitely pay for what you get in the higher end rubber boot category.But that doesn’t mean that they are perfect or that they will be perfect fitfor your line of work.
One thing I’ve noticed is that there is a break-in periodon these boots that is not very comfortable on the feet. It took mine about 2to 3 weeks to break-in to my foot. I experienced rubbing and soreness of myfoot. This really made me think that maybe I made a bad purchase but that did changeas they broke-in to my foot a few weeks later.
The other downside I found was that if you wear an orthoticin your boots, make sure to test that out at the store beforehand. These boots fitsnug and if you are wearing a thicker sock that will cut out any extra room foryour orthotics. But due to the snug fit I find them to give the support whereneeded.
Another note: the cold does affect these boots and willmake them more rigid. You will notice this in -10 to -40 degree weather andworking in those temps there will likely be ice or hard packed snow. Theseboots are like any other rubber boots on ice or hard packed snow and will beslippery. In my honest opinion if you’re just using this boot for around thehouse snow blowing or for garden work, they might just be the last pair you’llever buy.
WouldI buy Cofra thermic boots again?
I would absolutely buy the Cofra thermic boots again. I personally love these boots and after the initial break-in period they turned into one of my favorite pair of boots for home and construction sites. I really enjoy just being able to slip them on and off without boot liners and they actually have a built-in heel ledge that makes this even faster after a long day working outside. There also self standing so it makes taking them off very easy. I believe that there is a boot liner you can purchase with this boot however I have never felt the need to purchase those and my feet have always been warm in minus degree weather. All you need is a good pair of wool socks in these boots in the winter to keep your feet warm and dry.
These pics are of my Cofra boots in action at work and atplay over the last five years. However, I will add that 2 of those years werestrictly for home use and play. You can see from the pics throughout thispersonal review that the Cofra boots really stand up to a lot. Other then acouple of nicks out of the tread pattern my boots seem to be in the same shapefrom when I first purchased them, and I don’t see any major signs of thembreaking down soon. Its quite possible that these boots will see another 3years of winters on the construction site. So far so good. I’m quite impressedwith them.
This informational review has been gathered from mypersonal experience with this brand over the last five years, so it’s jammedpacked with helpful tips for anyone interested in purchasing them, now or downthe road.
Below I’ll be covering the types of jobs I think are bestsuited for this type of boot if worn on a daily basis. I’ll also show what aCofra pair of boots looks like after 5 years of heavy industrial form work, whichin my opinion is the most physical occupation one can have out of theconstruction industry. I’ll also be going over some top features any buyershould consider before making a purchase.
PROS CONS – Metal free – Aggressive tread – Electrical resistance – Tougher to operate heavy equipment – Cold protection to -50 degrees – Slip resistance – Chemical and hydrocarbon resistance – Cold makes them more rigid – Cut resistance – Thermal insulation – Waterproof – CSA/ANSI approved
TopKey Features to Consider
- 100% metal free: This makes the boot lightweight and provides added warmth due to a non-metallic toe cap
- High Electrical Resistance: The result of being steel free
- Cold Protection to -50: Yes, I’ve never had a major issue in the extreme cold with these boots with a higher end wool sock.
- Chemical and Hydrocarbon Resistance: Diesel and Gas. I’ve spilt both on mine multiple times throughout a job without any issues. I’ve also poured concrete multiple times and they’re still good as new.
- Cut Resistance: I’ve had plenty of opportunities to have my boot cut from rubbing against cut rebar and exposed nails and they hold up well to it. However, it does depend on the force in which the boot is exposed to. But daily scrapes there’s no issues here.
- Thermal Insulation: I personally have had no issues with my feet being cold in these boots in minus degree weather.
- Waterproof: Yes, 100%
- CSA/ANSI: Approved
Some downfalls of the Cofras
So, with this boot being of a superior quality-builtproduct, there are still some downfalls that I would like to mention:
The aggressivetread pattern: It’s great for work sites and shines throughon the ground and uneven ground, however it’s not the best for walking onscaffold planks because the tread tends to grab nail heads that might have beenleft in the wood. This could cause a trip and possibly a fall if not mindful ofit.
I’ve also found them to be large and kind of clunky whenclimbing ladders up and down on job sites. You really need to focus more thenusual when climbing a ladder in these boots because they grab the ladder rungsreally well. There’s no need to rush on jobsite anyways but be mind full thatthey can be sticky on certain surfaces.
The opposite goes for wet finished concrete floors. Theseboots will be slippery, and caution should be taken.
OperatingEquipment: If you operate some kind of equipment thatinvolves using your feet, you might find these boots to be a bit rigid andclumsy. Also, they might tire your legs out quicker then normal due to therigidity.
Having said that, I personally don’t have an issue withoperating skidsters or tele-handers with these boots on. On the other hand, Ihad a talk with a concrete driver who couldn’t stand these boots due to thembeing too rigid for driving the concrete truck all day.
SlipResistance: Yes, you might be thinking isn’t that a good thing andyes, I would have to agree with you. Like I stated above earlier due to therugged aggressive tread pattern they tend to grab more and that’s the issue onsite because when it happens it will cause you to jolt and throws you offbalance for a split second. I’ve noticed this happens more in these boots thenany other brand but it’s a good idea to keep in mind with any aggressive treadpattern.
Howthe cold effects the boot: I’ve found these boots to get rigid orstiffen up in colder working conditions and then they feel like your back tobreaking them in all over again. I have also noticed that with them being more rigidthan normal this can cause the boot to be more acceptable to slippery conditions.I would say this happens in -20 degree and colder weather. This wasn’t a dealbreaker for me because most boots are slippery in colder conditions anyway andat that point when working in extreme weather conditions it really comes downto one’s experience in the field and how you adapt to the different dynamics ofthe weather changes.
BreakDown of my 5-Year-Old Cofra Thermic Boots in Pics
So far, I have not had any issue with splitting of seems orcracks whatsoever. These boots have been put to the test on different jobsitesmany times.
I can only find a few small issues on the sole from normalwear and tear. But there’s still plenty of material there to wear out yet tocause any major issues. Check out the pics below for closer detail.
Cofra boots after 5 years of heavy industrial form work
As you can see there is quite a difference between both pairs of boots. Even though both were worn in the field for the same amount of time, the second pair was put through concrete on a daily basis whereas the first pair was not. The second pair is ready for retirement due to some major cracks on the boot. However look at the tread still left on these bad boys after five years of hard labor. I don’t know of too many pairs of boots that will last as long as these have.
Jobs best suited for the Cofra Thermic boots
- Refinery Worker
- Concrete Worker/ Form Work
- Forestry Worker
- Land Surveyor
- Construction Labourer
- Industrial Electrician
- Sewer and Watermain Worker
- TheseBoots are very durable and are great for work and play
- Theywill hold up to everything thrown at then from the construction site to thebarn yard and more.
- Theywill take a bit to break into your foot.
- Verywarm while working in winter conditions
- Willbe more ridged in colder winter conditions
- Aggressivetread pattern can be sticky on certain surfaces
- Treadpattern can be very slippery on wet smoother surfaces
- Notrecommended for drivers of dump trucks/Concrete Trucks or any type ofconstruction delivery personal due to being to ridged while driving.
- Theseboots are 100% water proof.
- Fullsafety stamped
- Metalfree = warmer in winter conditions
- Linerfree = ease of taking on and off
- Fitsnug so should try on at store first if you use a orthotic.
All-in-all these boots will serve the purpose for you and although they are not perfect, they are really close in my personal opinion. Click here to see the price.